The Medoc STL430 bandsaw is one of the largest Medoc bandsaws we sell. The bandsaw is constructed from 18/10 stainless steel with stainless steel pulleys and a double flap.
The bandsaw is sealed to IP65 water and dust protection levels and can be washed under pressure if required. The bandsaw blade is 3155mm in length and is held in place by the auto blade tensioner. The blade cleaners are removed quickly without the use of any tools and help prevent build up of product along the blade. The cleaners and the auto blade tensioner create a bandsaw that has a far better cutting action as well as increasing the life of the bandsaw blades themselves.
The BGR400 bandsaw comes complete with a product pusher or half sliding table and a thickness plate to help increase the accuracy of the cut. The bandsaws has a safety device which stops the blade running within 4 seconds. The Medoc BGR400 bandsaw is built to work in an industrial environment and is suitable for long shifts.
If you require a slightly smaller floor standing bandsaw then look at the STL350 or STL390 models, as well as the Kolbe K330s and K430S bandsaws.
- Bandsaw External Dimensions (WxDxH) 980x1100x935mm
- Bandsaw Max Cutting Height 420mm
- Bandsaw Max Cutting Thickness 375mm
- Bandsaw Blade Length 3155mm
- Bandsaw Wheel Size 400mm
- Bandsaw Motor 4 HP (3 phase)
- Bandsaw Blade Speed 31 m/s
- Bandsaw Construction stainless steel