The Medoc 3PH STL350 bandsaw is a floor standing bandsaw constructed in 18/10 stainless steel ideally suited for medium to high usage butchers or meat processors. The bandsaw is made in Spain, are built to work in an industrial environment and suitable for long shifts.
The bandsaw uses a bandsaw blade of 2500mm in length which is held in place by the auto-blade tensioner and blade guides. The blade cleaners are removable without the use of tools to allow for a fast and easy blade replacement process.
The bandsaw has stainless steel pulleys with double flaps and a safety device to stop the blade from turning within 4 seconds.
The Medoc STL350 bandsaw is sealed to IP65 dust and water protection levels and has incredibly easy access to allow for maintenance and cleaning. The machine can be washed under pressure if necessary.
The bandsaw is available as a left or right hand side machine to suit all customers, and comes complete with product pusher or half sliding table and a thickness plate to increase cutting accuracy.
If you are looking for a smaller model bandsaw then look at the Medoc ST320 or ST320-P or the small floor standing Kolbe K330-S bandsaw.
If you are looking for a larger model bandsaw then look at the Medoc STL390 or STL450 bandsaws, or the Kolbe K430-S or K440 bandsaws.
- Bandsaw Max Cutting Thickness 275mm
- Blade Length 2500mm
- Bandsaw Wheel Size 300mm
- Bandsaw Motor 3 HP (3 phase / 1 phase is available, please call)
- Bandsaw Blade Speed 23 m/s
- Bandsaw Construction stainless steel