Five Fingered Chain Mail Glove with Forearm, Size Large
Our steel mesh chain mail gloves protect against damage, wounds and cuts that can occur while working on meats or performing other activities.
Available in five different sizes which can be recognised by the letter printed on the buckle and integrated coloured stamp. Large = Blue
The buckle on the wrist and forearm allows the glove to adjust to your size.
The steel mesh fabric is composed of 4 mm diameter and 0.55 mm thick rings made from 100% high grade anticorrosive stainless steel with hermetically sealed micro plasma welds, which prevent bacterial growth and provide a consistency in the glove production. Gloves conform to EU standard EN1082.
Gloves should be worn only on the hand which does not
hold a knife or cutting tool. They can be worn on your right or left hand, so it is important to use the product which most suits your needs.
The glove with forearm protector only protects the body part it covers; if you need extra protection, we recommend our aluminium disk aprons
The glove material is conductive: Thus avoid contact with any metallic part that can conduct electricity. Gloves are not designed to protect against wounds caused by operating machines; therefore, they are not suitable when using an electrical saw or any equipment for the removal of skin and tendons. Some knives, particularly those with thin blades for the boning process, can penetrate gloves to a certain point; wearing a glove will not fully remove the risk, but the seriousness of the wound will be significantly lower.
It is important to choose the right size of glove, so that the steel is not too tight and the glove does not need replacing. If a glove is too small, it is not comfortable and can hurt your hand. If it is too big, it can be cumbersome and cause incidents on the job. To provide proper protection, gloves should be adjusted to the hands by means of the buckle provided.
Gloves are generously sized, so err towards a smaller size than you think you may need. If the glove does not fit, we will exchange for another size on a free swap service. Glove must be returned in an unused, resell-able condition.
Gloves should be used as they are manufactured and supplied: no change is allowed to avoid affecting protection and the manufacturer will not be liable for incidental damage caused by such modifications. The life of gloves depends on how often they are used. Note that when even one single ring opens protection can be affected, so it is necessary to repair the damaged part. Gloves should be cleaned and sterilised immediately after use, i.e. brush them with water and detergent for the food industry, then rinse with a lot of clean hot water (min. 82°C).
Gloves are packaged in plastic bags to maintain their original quality.